Vui lòng dùng định danh này để trích dẫn hoặc liên kết đến tài liệu này: https://dspace.ctu.edu.vn/jspui/handle/123456789/61073
Toàn bộ biểu ghi siêu dữ liệu
Trường DCGiá trị Ngôn ngữ
dc.contributor.authorVu, Minh Duc-
dc.contributor.authorNguyen, Chau Giang-
dc.date.accessioned2021-08-11T09:23:13Z-
dc.date.available2021-08-11T09:23:13Z-
dc.date.issued2021-
dc.identifier.issn2525-2321-
dc.identifier.urihttps://dspace.ctu.edu.vn/jspui/handle/123456789/61073-
dc.description.abstractThe purpose of this research is to produce of esterified thermoplastic starch (ETPS) for reactive extrusion melt-blending with polybutylene succinate (PBS) in film blowing application. Esterification TPS named M-TPS and T-TPS were prepared from cassava starch, glycerol (plasticizer), and maleic anhydride (MA), tartaric acid (TA) as reactive compatibilizers in a twin extruder, respectively. FTIR results showed that esterification reactions were successfully formed between both MA and TA with cassava starch. The esterified TPSs was then melt blended with PBS in the presence of four kinds of esterification catalysts. The effect of compatibilizer contents on the blend properties was studied in terms of tensile properties, melt flow index (MFI), and electron scanning microscopy (SEM). The results show that TA induced better compatibilization effect than MA did, as evidenced by the PBS/T-TPS blend possessing higher strength than these of PBS/M-TPS, although SEM images showed structural morphology of both blends is similar. The effect of the esterification catalyst type and contents on properties of the PBS,T-TPS blend was also studied. The results from the Molau test confirmed the formation of graft-copolymer (PBSgT-TPS) at the interface of two phases of the blend when compatibilizers were added in the presence of an organotin compound catalyst.vi_VN
dc.language.isovivi_VN
dc.relation.ispartofseriesVietnam Journay of Chemistry;No.59(1) .- P.90-97-
dc.subjectCassava starchvi_VN
dc.subjectEsterified TPSvi_VN
dc.subjectPolybutylene succinic (PBS)vi_VN
dc.subjectBlendsvi_VN
dc.subjectCompatibilizationvi_VN
dc.titleMorphology and properties of polybutylene succinic and cassava starch blend: Effect of esterification catalysts on graft copolymer formationvi_VN
dc.typeArticlevi_VN
Bộ sưu tập: Vietnam Journal of Chemistry

Các tập tin trong tài liệu này:
Tập tin Mô tả Kích thước Định dạng  
_file_
  Giới hạn truy cập
2.6 MBAdobe PDF
Your IP: 216.73.216.119


Khi sử dụng các tài liệu trong Thư viện số phải tuân thủ Luật bản quyền.