Please use this identifier to cite or link to this item: http://dspace.ctu.edu.vn/jspui/handle/123456789/12660
Title: An assessment of characteristics of densified high-performance concrete incorporating high volume fly ash
Authors: Huỳnh, Trọng Phước
Hwang, Chao-Lung
Keywords: High-performance concrete (HPC)
High volume fly ash
Densified mixture design algorithm (DMDA)
Engineering characteristic
Microstructure
Issue Date: 2018
Series/Report no.: Materials Science Forum;923 .- p. 105–109
Abstract: The present study evaluates the mechanical-microstructural characteristics of the densified high-performance concrete (HPC) incorporating high volume fly ash (FA). The densified mixture design algorithm (DMDA) technology was applied to design the concrete proportions. The effects of various FA contents on both fresh and hardened concrete were investigated. A scanning electron microscope (SEM) was used to observe the microstructure of the concrete samples. The effectiveness of using DMDA in mix deign was also discussed in this study. As the experimental results, the FA content was found to affect the concrete properties significantly. The maximum compressive strength value of 65.1 MPa was obtained at the concrete samples containing 40% FA. Additionally, the 40% FA samples exhibited a denser microstructure as compared to the others. Generally, all of the tested concrete samples exhibited good performance in terms of workability, strength development, water absorption, and porosity. The results of this study further show the effectiveness of using DMDA technology in proportioning of the concrete mixture.
URI: http://dspace.ctu.edu.vn/jspui/handle/123456789/12660
ISSN: 1662-9752
Appears in Collections:Tạp chí quốc tế

Files in This Item:
File Description SizeFormat 
_file_4.92 MBAdobe PDFView/Open
Your IP: 18.232.188.89


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.